About this item
Technical Data
Product name | Seajet 033 Shogun |
Type of product | Antifouling |
Area of use | Below waterline |
Recommended coats per season | 2 |
Substrates | Polyester
Steel Wood |
Water types | Salt water
Fresh water Brackish water |
Maximum speed | 40 knots |
Application method | Roller
Brush Airless spray |
Coverage rate | 9.98 m² p/liter |
Pack size | 750ml / 2.5lt / 5lt / 20lt |
Seajet 033 Shogun
Seajet 033 Shogun is a premium self-polishing antifouling. The paint is highly effective in preventing slime and weed from attaching to vessels. The antifouling is suitable for high fouling areas and has a high coverage rate. The colours available are grey, mid blue, dark blue, red and black and are used for the vessel’s surface beneath the water. Keep in mind that the colours may change slightly, due to friction of the water.
Solution for marine growth
The Seajet 033 Shogun antifouling is the best option to prevent marine growth from attaching to yachts or motorboats. The special made paint is free of tin and self-polishing. It can be used for vessels, which will not be travelling faster than 40 knots.
Seajet 033 Shogun application
There are a few steps to take for a proper application of the paint to the surface. Firstly, if there is another layer of antifouling on the surface, you have to remove it. Removing antifouling has to be done by wet sanding, or by a chemical removal. Never use a burner to remove the antifouling.
If the previous antifouling is in bad shape, you will have to remove it entirely. If the existing paint is in good condition, use our Seajet antifouling tolerance table to make sure your antifouling is properly attached. Clean the antifouling with a high-pressure water spray with approximately 200 bar. It will help to remove the marine growth and salt crystals.
Before the application, make sure the surface is dry, clean and free of oil. Then, apply two layers of Seajet 033 Shogun. Make sure to add more layers of coating to sharp and hard to reach spots, such as the rudder and the waterline.
Application on different surfaces
To apply the Seajet 033 Shogun antifouling to wood, you first have to use the Seajet 015 Underwater primer. For steel or polyester, either use Seajet 015 or 117 beforehand. Never apply Seajet 033 Shogun to aluminum. For more information, read the technical or the material safety data sheet. On this page, you can also find the technical data and paint calculator. You can find other Seajet products on the product page.
Description
Seajet 033 Shogun is premium self polishing antifouling which is highly effective against slime and weed. Suitable for high fouling areas.
- Self polishing
- Highly effective against slime and algae
- Test winning heritage
- High coverage rate
Additional information
color | Black, Dark Grey, Mid blue, Navy blue, Red |
---|---|
litres | 0.75, 2.5, 20, 5 |
Related products
-
SHADOW CASTER SCR-16
-
- 7%
Seajet Bioclean Eco System
د.إ523.00 – د.إ1,722.00 -
Seajet 035 Hard Racing
Reviews
There are no reviews yet.