Seajet 015 Underwater Primer

د.إ117.00د.إ2,183.00

Seajet 021 Eko

د.إ109.00د.إ641.00

Seajet 027 Saiko

د.إ161.00د.إ4,033.00

Seajet 031 Samurai

د.إ142.00د.إ3,419.00

Seajet 032 Professional

د.إ491.00د.إ2,625.00

Seajet 033 Shogun

د.إ213.00د.إ4,529.00

Seajet 034 Emperor A

د.إ122.00د.إ389.00

Seajet 037 Coastal

د.إ132.00د.إ2,986.00

Seajet 038 Taisho

د.إ1,388.00د.إ5,424.00

Seajet 039 Platinum

د.إ785.00د.إ1,505.00

Seajet 039 Platinum Mono Component

د.إ1,697.00د.إ6,494.00
Seajet 012 Universal Primer - Undercoat Sale!

Seajet 012 Universal Primer – Undercoat

د.إ102.00د.إ288.00

Seajet 012 Universal Primer – Undercoat

Seajet 012 Universal Primer is a primer and undercoat for one component topcoats. Suitable for above the waterline only. Seajet 012 is quick drying and has an excellent adhesion to all surfaces and subsequent coats. Available in off-white.

Seajet 015 Underwater Primer Sale!

Seajet 015 Underwater Primer

د.إ117.00د.إ2,183.00
Seajet 015 Underwater Primer is based on a special acrylic resin and works as an excellent sealer/barrier coat over unknown, incompatible and Teflon based antifouling. It is quick drying and adheres excellent to subsequent coats. Available in silver grey.

Seajet 017 Epoxy Bonding Primer for Alloys

Seajet 017 Epoxy Bonding Primer for Alloys is a two component primer. This primer is suitable for above and below the waterline. Recommended as first primer for aluminium,  alloys and bronze. Superior performance compared to etching primer. Available in white.

Seajet 021 Eko Sale!

Seajet 021 Eko

د.إ109.00د.إ641.00

Seajet 021 Eko is a biocide-free, erodible underwater coating. The unique resin makes the coating refresh layer after layer. This ‘soap’ mechanism makes it difficult for fouling to stick.

Seajet 023 Teichi

Seajet 023 Teichi is a self-polishing, copper-based antifouling that provides season-long protection against fouling in fresh, brackish and salt water. It is suitable for boats with speeds up to 40 knots in moderate fouling areas. Suitable for use on all surfaces except aluminum.

Product name Seajet 023 Teichi
Type of product Antifouling
Area of use Below waterline
Substrates Polyester

Steel

Wood

Water types Salt water

Fresh water

Brackish water

Maximum speed 30 knots
Application method Roller

Brush

Airless spray

Coverage rate 10 m² p/liter
Pack size 750ml / 2.5lt / 5lt / 15lt
Seajet 027 Saiko Sale!

Seajet 027 Saiko

د.إ161.00د.إ4,033.00

Technical Data

Product name Seajet 027 Saikō
Type of product Antifouling
Area of use Below waterline
Recommended coats per season 3
Substrates Polyester

Steel

Aluminium

Wood

Water types Salt water

Fresh water

Brackish water

Maximum speed 40 knots
Application method Roller

Brush

Airless spray

Coverage rate 10 m² p/liter
Pack size 750ml – 2.5lt – 5lt – 20lt

Seajet 031 Samurai Sale!

Seajet 031 Samurai

د.إ142.00د.إ3,419.00

Seajet 031 Samurai is a slow polishing antifouling with a great value for money. Season long performance.

  • Slow polishing
  • Effective low-cost antifouling
  • Moderate fouling areas
  • High coverage rate
  • Test winning heritage
Seajet 032 Professional Sale!

Seajet 032 Professional

د.إ491.00د.إ2,625.00

Seajet 032 Professional is a copper-based antifouling for moderate fouling areas. For professional applicators.

  • Compatible with almost all antifouling
  • Season-long protection
  • Economical antifouling
Seajet 033 Shogun Sale!

Seajet 033 Shogun

د.إ213.00د.إ4,529.00

Technical Data

 

Product name Seajet 033 Shogun
Type of product Antifouling
Area of use Below waterline
Recommended coats per season 2
Substrates Polyester

Steel

Wood

Water types Salt water

Fresh water

Brackish water

Maximum speed 40 knots
Application method Roller

Brush

Airless spray

Coverage rate 9.98 m² p/liter
Pack size 750ml / 2.5lt / 5lt / 20lt

 

Seajet 033 Shogun

Seajet 033 Shogun is a premium self-polishing antifouling. The paint is highly effective in preventing slime and weed from attaching to vessels. The antifouling is suitable for high fouling areas and has a high coverage rate. The colours available are grey, mid blue, dark blue, red and black and are used for the vessel’s surface beneath the water. Keep in mind that the colours may change slightly, due to friction of the water.
 

Solution for marine growth

The Seajet 033 Shogun antifouling is the best option to prevent marine growth from attaching to yachts or motorboats. The special made paint is free of tin and self-polishing. It can be used for vessels, which will not be travelling faster than 40 knots.

Seajet 033 Shogun application

There are a few steps to take for a proper application of the paint to the surface. Firstly, if there is another layer of antifouling on the surface, you have to remove it. Removing antifouling has to be done by wet sanding, or by a chemical removal. Never use a burner to remove the antifouling.

If the previous antifouling is in bad shape, you will have to remove it entirely. If the existing paint is in good condition, use our Seajet antifouling tolerance table to make sure your antifouling is properly attached. Clean the antifouling with a high-pressure water spray with approximately 200 bar. It will help to remove the marine growth and salt crystals.

Before the application, make sure the surface is dry, clean and free of oil. Then, apply two layers of Seajet 033 Shogun. Make sure to add more layers of coating to sharp and hard to reach spots, such as the rudder and the waterline.

Application on different surfaces

To apply the Seajet 033 Shogun antifouling to wood, you first have to use the Seajet 015 Underwater primer. For steel or polyester, either use Seajet 015 or 117 beforehand. Never apply Seajet 033 Shogun to aluminum. For more information, read the technical or the material safety data sheet. On this page, you can also find the technical data and paint calculator. You can find other Seajet products on the product page.

Seajet 034 Emperor Sale!

Seajet 034 Emperor A

د.إ122.00د.إ389.00

Seajet 034 Emperor is a high-performance self-polishing antifouling, suitable for aluminium. Ideal for club racers as it can be burnished during the season.

  • Self-polishing
  • Ideal for club racers as it can be burnished during the season
  • Suitable for aluminium hulls
  • Available in bright colours
  • High coverage rate

Seajet 035 Hard Racing

Seajet 035 Hard Racing is a hard antifouling for boats with high coverage rate. It can be burnished to a smooth and slippery finish before the start of each and every race.

  • Hard matrix antifouling
  • Speed up to 70 knots
  • Polishable
  • Bright colours

Seajet 036 Endurance

1 Review

Seajet 036 Endurance is a hard matrix antifouling with high copper content and a correspondingly high coverage rate. Suitable for high fouling areas and speeds up to 70 knots.

  • Hard antifouling
  • Suitable for high fouling areas
  • High solids (60%)
  • For high-speed crafts
Seajet 037 Coastal Sale!

Seajet 037 Coastal

د.إ132.00د.إ2,986.00

Seajet 037 Coastal is a hard antifouling for boats with speeds up to 70 knots. Suitable for salt water, fresh water, and brackish water.

  • Hard matrix antifouling
  • Performs in inland waterways
  • Suitable for drying mud berths
  • For high-speed craft
Seajet 038 Taisho Sale!

Seajet 038 Taisho

د.إ1,388.00د.إ5,424.00

Seajet 038 Taisho is a copper free, super self polishing antifouling. Suitable for the highest fouling areas in all waters. Suitable for all substrates including aluminium.

  • Advanced Self Polishing Copolymer (SPC) antifouling
  • Copper free based on Econea®
  • More eco-responsible
  • For all types of water
  • Bright colours including bright white
  • Test winning heritage
Sale!

Seajet 039 Platinum

د.إ785.00د.إ1,505.00

Seajet 039 Platinum is an advanced Self Polishing Copolymer (SPC) antifouling. An ultimate performance antifouling suitable for the highest fouling areas. Ideal for blue water cruisers.

  • Advanced Self Polishing Copolymer (SPC) antifouling
  • Ultimate performance
  • Highest fouling areas
  • Strong antifouling protection
Seajet 039 Platinum Mono Component Sale!

Seajet 039 Platinum Mono Component

د.إ1,697.00د.إ6,494.00

Seajet 032 Professional is a copper-based antifouling for moderate fouling areas. For professional applicators.

  • Compatible with almost all antifouling
  • Season-long protection
  • Economical antifouling