Seajet 033 Shogun Sale!

Seajet 033 Shogun

د.إ103.00د.إ2,456.00

Technical Data

 

Product name Seajet 033 Shogun
Type of product Antifouling
Area of use Below waterline
Recommended coats per season 2
Substrates Polyester

Steel

Wood

Water types Salt water

Fresh water

Brackish water

Maximum speed 40 knots
Application method Roller

Brush

Airless spray

Coverage rate 9.98 m² p/liter
Pack size 750ml / 2.5lt / 5lt / 20lt

 

Seajet 033 Shogun

Seajet 033 Shogun is a premium self-polishing antifouling. The paint is highly effective in preventing slime and weed from attaching to vessels. The antifouling is suitable for high fouling areas and has a high coverage rate. The colours available are grey, mid blue, dark blue, red and black and are used for the vessel’s surface beneath the water. Keep in mind that the colours may change slightly, due to friction of the water.
 

Solution for marine growth

The Seajet 033 Shogun antifouling is the best option to prevent marine growth from attaching to yachts or motorboats. The special made paint is free of tin and self-polishing. It can be used for vessels, which will not be travelling faster than 40 knots.

Seajet 033 Shogun application

There are a few steps to take for a proper application of the paint to the surface. Firstly, if there is another layer of antifouling on the surface, you have to remove it. Removing antifouling has to be done by wet sanding, or by a chemical removal. Never use a burner to remove the antifouling.

If the previous antifouling is in bad shape, you will have to remove it entirely. If the existing paint is in good condition, use our Seajet antifouling tolerance table to make sure your antifouling is properly attached. Clean the antifouling with a high-pressure water spray with approximately 200 bar. It will help to remove the marine growth and salt crystals.

Before the application, make sure the surface is dry, clean and free of oil. Then, apply two layers of Seajet 033 Shogun. Make sure to add more layers of coating to sharp and hard to reach spots, such as the rudder and the waterline.

Application on different surfaces

To apply the Seajet 033 Shogun antifouling to wood, you first have to use the Seajet 015 Underwater primer. For steel or polyester, either use Seajet 015 or 117 beforehand. Never apply Seajet 033 Shogun to aluminum. For more information, read the technical or the material safety data sheet. On this page, you can also find the technical data and paint calculator. You can find other Seajet products on the product page.

Seajet 034 Emperor Sale!

Seajet 034 Emperor A

د.إ122.00د.إ389.00

Seajet 034 Emperor is a high-performance self-polishing antifouling, suitable for aluminium. Ideal for club racers as it can be burnished during the season.

  • Self-polishing
  • Ideal for club racers as it can be burnished during the season
  • Suitable for aluminium hulls
  • Available in bright colours
  • High coverage rate

Seajet 035 Hard Racing

Seajet 035 Hard Racing is a hard antifouling for boats with high coverage rate. It can be burnished to a smooth and slippery finish before the start of each and every race.

  • Hard matrix antifouling
  • Speed up to 70 knots
  • Polishable
  • Bright colours

Seajet 036 Endurance

Seajet 036 Endurance is a hard matrix antifouling with high copper content and a correspondingly high coverage rate. Suitable for high fouling areas and speeds up to 70 knots.

  • Hard antifouling
  • Suitable for high fouling areas
  • High solids (60%)
  • For high-speed crafts

Seajet 037 Coastal

Seajet 037 Coastal is a hard antifouling for boats with speeds up to 70 knots. Suitable for salt water, fresh water, and brackish water.

  • Hard matrix antifouling
  • Performs in inland waterways
  • Suitable for drying mud berths
  • For high-speed craft
Seajet 038 Taisho Sale!

Seajet 038 Taisho

د.إ1,182.00د.إ4,475.00

Seajet 038 Taisho is a copper free, super self polishing antifouling. Suitable for the highest fouling areas in all waters. Suitable for all substrates including aluminium.

  • Advanced Self Polishing Copolymer (SPC) antifouling
  • Copper free based on Econea®
  • More eco-responsible
  • For all types of water
  • Bright colours including bright white
  • Test winning heritage
Sale!

Seajet 039 Platinum

د.إ515.00د.إ949.00

Seajet 039 Platinum is an advanced Self Polishing Copolymer (SPC) antifouling. An ultimate performance antifouling suitable for the highest fouling areas. Ideal for blue water cruisers.

  • Advanced Self Polishing Copolymer (SPC) antifouling
  • Ultimate performance
  • Highest fouling areas
  • Strong antifouling protection
Seajet 039 Platinum Mono Component Sale!

Seajet 039 Platinum Mono Component

د.إ1,287.00د.إ4,786.00

Seajet 032 Professional is a copper-based antifouling for moderate fouling areas. For professional applicators.

  • Compatible with almost all antifouling
  • Season-long protection
  • Economical antifouling
Seajet 114 Propeller Primer Sale!

Seajet 114 Propeller Primer

د.إ86.00

Seajet 114 Propeller Primer is an epoxy primer that maximises adhesion to aluminium and alloys. It offers superior performance to etching primers and can be used above and below water, on stern gear, outboard legs, propellers, trim tabs etc.

Seajet 117 Multipurpose Epoxy Primer Sale!

Seajet 117 Multipurpose Epoxy Primer

د.إ110.00د.إ1,535.00

Seajet 117 Multipurpose Epoxy Primer is a two component primer, durable and protects your boat against osmosis with 4 roller coats. Suitable in combination with antifouling and two-component topcoats. An ideal first coat for GRP. Available in silver grey (recommended for below water) and off-white (recommended for above water).

Seajet 118 Ultra-Build Epoxy Primer

Seajet 118 Ultra-Build Epoxy Primer is a two component primer, suitable for above and below the waterline. High solid primer, fast drying. This primer protects your boat against osmosis and is recommended for metal surfaces where the preparation is not ideal. Available in silver.

Seajet 120 UV Varnish Sale!

Seajet 120 UV Varnish

د.إ132.00د.إ421.00

Seajet 120 UV Varnish is a beautiful, high gloss traditional tung oil varnish. This one component varnish contains UV absorbers to provide longer life and is easy to apply.

Seajet 122 Brilliance Sale!

Seajet 122 Brilliance

د.إ160.00

Seajet 122 Brilliance is a high performance one component topcoat which is easy to apply for a durable finish. Resistant to minor knocks. Available in white, oyster white, cream, mid blue, navy blue, signal red and black.

Seajet 130 Gloss Varnish Sale!

Seajet 130 Polyurethane Gloss Varnish

د.إ277.00

Seajet 130 Polyurethane Gloss Varnish is a beautiful, high gloss traditional varnish. This two component varnish provides high UV protection, is resistant to abrasion, loss of gloss and chemicals.

Seajet 132 Polyurethane Topcoat Sale!

Seajet 132 Polyurethane Topcoat

د.إ277.00

Seajet 132 Polyurethane Topcoat is an ultimate performance two component topcoat for long term gloss and colour retention. Very tough and durable finish. Available in white, oyster white, cream, mid blue, navy blue, signal red en black.

Seajet 2300 Hard Coating

Seajet 2300 Hard Coating is designed for trailer boats. The hard coating protects the hull and can be high pressure washed every haul out without damaging.